General Information

• Slope

  • The minimum recommended slope for the Image II roof panel is 3:12.

• Substructure

  • Image II is designed to be utilized over a solid substrate. To avoid panel distortion use a properly aligned and uniform substructure. NOTE: Image II roof panels are not recommended for use over open structural framing

• Coverage

  • Image II panels are available in a 1" seam height with a 12" or 16" width coverage.

• Length

  • Minimum factory cut length is 5'-0". Maximum recommended panel length is 30'-0". Longer panels require additional consideration in packaging, shipping, and erection. Please consult Metal Sales for recommendations.

• Fasteners

  • The fastener selection guide should be consulted for choosing the proper fastener for specifi c applications. Quantity and type of fastener must meet necessary loading and code requirements.

  • NOTE: All panels are subject to surface distortion due to improperly applied fasteners. Overdriven fasteners will cause stress and induce oil canning across the face of the panel at or near the point of attachment.

• Availability

  • Finishes: Acrylic Coated Galvalume®, MS Colorfast45®, or various Kynar 500 (PVDF) colors. Gauge: 26ga standard